:Misc. Industrial For Sale

1 Cylinder Gasoline Engine • (2) Champion 4650 watt inverters • (2) Generac 2600 psi pressure washers

1 Cylinder Gasoline Engine • (3) Champion 4650 watt Inverters • (3) 2 in Water Pumps

1 Cylinder Gasoline Engine • (4) Champion 4650 watt inverters • (2) 2 in Water Pumps

(2) pallet jacks • General inverter • demolition breaker

(3) 2 in Water Pumps • (1) Dewalt Pressure Washer

HT#MM1710341321 (1) 7.0" X 5.75"ID • HT#42015 (3) 7.0" X 5.75"ID • HT#42310 (7) 7.0" X 5.75"ID • HT#41630 (12) 7.0" X 5.75"ID

HT#J6946 (16) 7.0" X 5.50"ID • HT#J6736 (1) 7.0" X 5.50"ID • HT#42015 (3) 7.0" X 5.50"ID • HT#42310 (7) 7.0" X 5.50"ID

Seller supplied information: Galvanized • Water-Bearing wash Unit: Drive Through Design • Double Side Nozzle Bars Per Side • Recycling Tank • All Pump Brackets and Piping Included • Two Submersible Pumps • Single Chain Conveyor • Up To 150 Trucks Per Working Day • Fields Of Application- Construction sites • Gravel plants and quarries • Concrete mixing plants • Landfill sites • Cleaning and disinfection • Recycling facilities • Specifications: Drive Through Length: 157" • Passage Width: 110" • Maximum • Axle Load: 33 •000 lbs • Pumping Capacity: 2×2.5 m³/min • Tank Capacity: 5 •200 Gal • Volts: 460 • Hertz: 60 • Sound emission: < 75 dB

Weight: 24273 • Dimension: .0360" X 60"

Weight: 25640 • Dimension: .0360" X 60"

Weight: (N) 24 •736 (G) 24 •758 • Dimension: .0595" X 72"

Weight: 21760 • Dimension: .0480" X 60"

Weight: 26742 • Dimension: .030" X 60"

Weight: (N)15 •697 (G) 15 •763 • Dimension: .060" X 72"

Weight:(N) 25 •706 (G) 25 •728 • Dimension: .036" X 60"

3 Phase Motor • Tilting Feed • 5 Simultaneous Filling Points • Cap Press • Wash Station • A267072

Single Phase Motor • 150W Laser • 3 m x 1.5 m Cutting Bed • Pure-Air Fume Extraction System • E-Stops • A267071

To Fit Hassle Holm

- Less than 55 hours on the motors - With 235' of 5/16 cable in 500' auto-coiler - Controlled descent at half rated speed during power loss - Long-lasting electromagnetic brake; always engaged when power is off - Built-in overload sensor and overspeed brake - Reinforced midair transfer point and wear plates at base - Hour meter records operating hours for maintenance tracking A self-contained • single line unit • the ST-180 features a working swath of 8 feet. Adding flydecks enlarges the ST-180 to 14 ft • accommodating two workers to double productivity. Contractors can add modular platforms or plank sections between two ST-180s to form a double line suspended scaffold. With modular sections • workers can quickly connect sections without special tools to create a maximum reachable working swath of 56 or 62 ft with flydecks attached. The unit comes equipped with numerous safety devices to ensure safe operation.

- Less than 55 hours on the motors - With 235' of 5/16 cable in 500' auto-coiler - Controlled descent at half rated speed during power loss - Long-lasting electromagnetic brake; always engaged when power is off - Built-in overload sensor and overspeed brake - Reinforced midair transfer point and wear plates at base - Hour meter records operating hours for maintenance tracking A self-contained • single line unit • the ST-180 features a working swath of 8 feet. Adding flydecks enlarges the ST-180 to 14 ft • accommodating two workers to double productivity. Contractors can add modular platforms or plank sections between two ST-180s to form a double line suspended scaffold. With modular sections • workers can quickly connect sections without special tools to create a maximum reachable working swath of 56 or 62 ft with flydecks attached. The unit comes equipped with numerous safety devices to ensure safe operation.

- Less than 55 hours on the motors - With 235' of 5/16 cable in 500' auto-coiler - Controlled descent at half rated speed during power loss - Long-lasting electromagnetic brake; always engaged when power is off - Built-in overload sensor and overspeed brake - Reinforced midair transfer point and wear plates at base - Hour meter records operating hours for maintenance tracking A self-contained • single line unit • the ST-180 features a working swath of 8 feet. Adding flydecks enlarges the ST-180 to 14 ft • accommodating two workers to double productivity. Contractors can add modular platforms or plank sections between two ST-180s to form a double line suspended scaffold. With modular sections • workers can quickly connect sections without special tools to create a maximum reachable working swath of 56 or 62 ft with flydecks attached. The unit comes equipped with numerous safety devices to ensure safe operation.

- Less than 55 hours on the motors - With 235' of 5/16 cable in 500' auto-coiler - Controlled descent at half rated speed during power loss - Long-lasting electromagnetic brake; always engaged when power is off - Built-in overload sensor and overspeed brake - Reinforced midair transfer point and wear plates at base - Hour meter records operating hours for maintenance tracking A self-contained • single line unit • the ST-180 features a working swath of 8 feet. Adding flydecks enlarges the ST-180 to 14 ft • accommodating two workers to double productivity. Contractors can add modular platforms or plank sections between two ST-180s to form a double line suspended scaffold. With modular sections • workers can quickly connect sections without special tools to create a maximum reachable working swath of 56 or 62 ft with flydecks attached. The unit comes equipped with numerous safety devices to ensure safe operation.